We have a 2007 Bounder 33r
I cannot get zone 2 on thermostat to respond..
Zone 1 works fine
Any hp would be appreciated
Thermostat
Moderator: BobRay
Re: Thermostat
AFAIK, the furnace does not respond to the zone 2 setting, only the zone 1 (front) setting (unless you have two furnaces in that rig).
The ACs will respond to both zone 1 and zone 2 because there are two of them -- one for each zone, but if there's only one furnace it responds to the sensor in the middle of the coach (zone 1).
The ACs will respond to both zone 1 and zone 2 because there are two of them -- one for each zone, but if there's only one furnace it responds to the sensor in the middle of the coach (zone 1).
Bob Ray
2006 35E Workhorse
2006 35E Workhorse